CNC Aluminium Hopup Chamber SV - VFC SCAR-L/H

The SV-VFC Hop-Up Chamber has a precision rotary dial for fine hop-up adjustment, as well as redesigned hopup levers and concave lugs to work best with both R-hop and Standard-Hop.

The unit is designed to be compatible with nozzle lengths from 21.00mm to 21.25mm on the SCAR-L VFC and 38.50mm to 38.75mm on the SCAR-H VFC. The Hop-Up chamber features a new CNC Delrin Locking C-Clip design that holds the barrel firmly without wobbling or twisting. The new design of extended sliding arms on both sides of the chamber housing keeps the hop-up unit centered, level and airtight at all times.

Compatible accessories:

• UV LED Tracer and electronics for illuminating the BBs in the dark. (Sold separately)
• Empty magazine detection sensor and electronic switch control to stop motor/HPA firing when magazine is empty. (Sold separately)

Strengths:

• Manufactured from a uniform block of aerospace aluminum with low tolerances to ensure improved accuracy, consistency and durability
• Improved accuracy and ensure a consistent air seal for AEG's VFC SCAR-L/H series
• Precision rotary wheel design for fine hop-up adjustment
• Redesigned hop-up lever and concave lugs to work best with the R-hop and Standard-Hop and to ensure the BB fires straight and accurately on every single shot
• Removable slotted pin with brass thread for adjustment and maintenance
• Acceptable nozzle lengths from 21.00mm to 21.25mm for the VFC SCAR-L and 38.50mm to 38.75mm for the VFC SCAR-H
• Fully compatible with most aftermarket soft and hard rubber struts with no loss of FPS or BB dropping
• Equipped with the new CNC Delrin Locking C-Clip design for a solid barrel fit without wobbling or twisting
• Extended sliding arm design on both sides of the chamber housing ensures the hopup unit is always centered, level and airtight in all conditions.

Specifications:

• Overall length: 48.35 mm
• Overall height: 27 mm
• Outer diameter (to fit the gearbox): free size
• Outer diameter (to fit into outer barrel): min 12 mm
• Inner diameter (to fit the nozzle): max 8.3 mm
• Outside diameter of the feeder (for the magazine): free size
• Feeder length (for magazine): free size
• Material: aluminium 6061

Set includes:

• 1 x CNC aluminium Hop-Up Chamber SV
• 2 x set of solid clear vinyl covers
• 1 x CNC aluminium standard hop arm
• 1 x CNC Aluminum R-Hop Arm
• 1 x Silicone Rubber Standard-Hop Nub Damper
• 1 x Silicone Rubber R-Hop Nub Damper
• 1 x CNC Aluminium 4.5mm Length Precision R-Hop Concave Nub
• 1 x CNC Aluminium 6mm length Precision R-Hop Concave Nub
• 1 x CNC Brass Threaded Stud
• 1 x CNC Delrin Locking C-Clip
• 1 x CNC barrel brass spacer
• 1 x Brass Spacer Oring
• 1 x Steel Push Spring